HPE P66776-B21 - DL325 G11 9354P MR408i-o 8SFF Svr
ProLiant DL325 Gen11 9354P 3.25GHz 32-core 1P 32GB-DR MR408i-o 8SFF 800W PS Server
Part#:
P66776-B21
Manufacturer:
HPE
Excl. VAT: £13,228.00
Available to Backorder: contact for lead time
Are you looking for a scalable, low-cost performance server solution for your virtualized and software-defined compute workloads? The HPE ProLiant DL325 Gen11 server is a low-cost 1U 1P solution that delivers exceptional value balancing compute, memory and network bandwidth at 1P economics. Powered by 4th and 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with up to 160 cores, increased memory bandwidth (up to 3 TB), high-speed PCIe Gen5 I/O and EDSFF storage, and supporting up to two GPUs at the front, this server is a superb low-cost, 1U 1P, performance solution for your virtualized workloads. The silicon root of trust anchors the server firmware, creating a fingerprint for the AMD Secure Processor that must be matched exactly before the server will boot. The HPE ProLiant DL325 Gen11 server is an excellent choice for virtualized workloads such as software-defined compute, CDN, VDI, and secure edge apps that require balancing processor, memory, and network bandwidth.
What is new supporting point:
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.
Supports hot-pluggable, high-availability RAID M.2 boot options.
Supports closed-loop liquid cooling heat sink for high wattage processors.
Powered by 4th and 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with 5nm technology that supports up to 160 cores at 400W, 1150 MB of L3 cache, and 12 DIMMs for DDR5 memory up to 6400 MT/s.
12 DIMM channels per processor for up to 3 TB total DDR5 memory with increased memory bandwidth and performance, and lower power requirements.
Advanced data transfer rates and higher network speeds from the PCIe Gen5 serial expansion bus, with up to 2x16 PCIe Gen5, two OCP 3.0 slots, and EDSFF E3.S 1T drives.
What is new supporting point:
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.
Supports hot-pluggable, high-availability RAID M.2 boot options.
Supports closed-loop liquid cooling heat sink for high wattage processors.
Powered by 4th and 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with 5nm technology that supports up to 160 cores at 400W, 1150 MB of L3 cache, and 12 DIMMs for DDR5 memory up to 6400 MT/s.
12 DIMM channels per processor for up to 3 TB total DDR5 memory with increased memory bandwidth and performance, and lower power requirements.
Advanced data transfer rates and higher network speeds from the PCIe Gen5 serial expansion bus, with up to 2x16 PCIe Gen5, two OCP 3.0 slots, and EDSFF E3.S 1T drives.
More Information
Part#
P66776-B21
EAN
0190017692098
Specification
| Processor | |
|---|---|
| Processor cache | 256 MB |
| Processor frequency | 3.25 GHz |
| Processor boost frequency | 3.8 GHz |
| Number of processors installed | 1 |
| Processor model | 9354P |
| Processor cores | 32 |
| Processor manufacturer | AMD |
| Motherboard chipset | AMD SoC |
| Processor family | AMD EPYC |
| Memory | |
| Internal memory | 32 GB |
| Memory layout (slots x size) | 1 x 32 GB |
| Memory slots | 12x DIMM |
| Memory clock speed | 4800 MHz |
| Maximum internal memory | 3.07 TB |
| Internal memory type | DDR5-SDRAM |
| ECC | Yes |
| Storage | |
| Supported RAID controllers | HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller |
| Number of SSDs supported | 8 |
| Total storage capacity | 0 GB |
| Supported HDD sizes | 2.5" |
| SSD interface | PCI Express 4.0 |
| RAID support | Yes |
| RAID levels | 0, 1, 5, 6, 10, 50, 60 |
| Optical drive type | No |
| Number of HDDs supported | 8 |
| Maximum storage capacity | 76.8 TB |
| Hot-Plug support | Yes |
| HDD interface | SATA, Serial Attached SCSI (SAS) |
| Supported SSD sizes | 2.5" |
| Graphics | |
| Maximum graphics card memory | 16 MB |
| On-board graphics card | Yes |
| Network | |
| LAN controller | Broadcom BCM5716 |
| Ethernet LAN | Yes |
| Ethernet interface type | 10 Gigabit Ethernet |
| Ports & interfaces | |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| VGA (D-Sub) ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Optical drive | |
| Optical drive type | No |
| Design | |
| Rack mounting | Yes |
| Optical drive type | No |
| Chassis type | Rack (1U) |
| Performance | |
| Compatible operating systems | Windows Server 2019 Windows Server 2022 Red Hat Enterprise Linux (RHEL) 8.6 Red Hat Enterprise Linux (RHEL) 9.0 SUSE Linux Enterprise Server (SLES) 15 SP4 VMware ESXi 7.0 U3 VMware ESXi 8.0 |
| Remote administration | iLO 6 ASIC |
| Trusted Platform Module (TPM) version | 2.0 |
| Trusted Platform Module (TPM) | Yes |
| Operating system installed | No |
| Software | |
| Compatible operating systems | Windows Server 2019 Windows Server 2022 Red Hat Enterprise Linux (RHEL) 8.6 Red Hat Enterprise Linux (RHEL) 9.0 SUSE Linux Enterprise Server (SLES) 15 SP4 VMware ESXi 7.0 U3 VMware ESXi 8.0 |
| Operating system installed | No |
| Power | |
| Number of main power supplies | 1 |
| Redundant power supply (RPS) support | Yes |
| Power supply | 800 W |
| Management features | |
| Remote administration | iLO 6 ASIC |
| Sustainability | |
| Sustainability certificates | ENERGY STAR |
| Technical details | |
| Trusted Platform Module (TPM) version | 2.0 |
| Trusted Platform Module (TPM) | Yes |
| Supported HDD sizes | 2.5" |
| Rack mounting | Yes |
| Hot-Plug support | Yes |
| Ethernet interface type | 10 Gigabit Ethernet |
| Chassis type | Rack (1U) |
| Sustainability certificates | ENERGY STAR |
| Weight & dimensions | |
| Width | 600 mm |
| Weight | 22.1 kg |
| Height | 242 mm |
| Depth | 916 mm |
Manufacturer
HPE
